24-Hour Heating & Air Conditioning Repair in Wausau
For over a century, Frasier’s Plumbing, Heating & Cooling has been there for our clients throughout Northern Wisconsin. Whether you need a quick AC maintenance check or have a middle-of-the-night furnace repair emergency, our licensed and bonded professionals are here to help homeowners with their HVAC needs with same-day appointments.
Through the decades we have been in business, a lot has changed since we did our first heating repair job in 1918. However, one thing has remained the same: exceptional customer service. Frasier’s has earned many awards and accolades, but no achievement is as gratifying as a satisfied customer who awards us with repeat business. One way we earn repeat customers is our competitive, upfront pricing with no pesky, hidden fees. Our friendly technicians will explain your HVAC repair or maintenance needs in plain English. While giving ample guidance, we work with your budget and only perform services you specifically need or request.
Call us if you need any of the following heating or air conditioning services in Wausau:
- HVAC installation: We install only the best products, providing superior performance you’d expect with money-saving energy efficiency.
- HVAC repair: If you need a same-day service for furnace repair or an indoor air quality check, we can help you.
- HVAC service: We keep your HVAC systems running smoothly.
- Air quality solutions: Breathe easier with our air quality testing, along with our duct cleaning and air purification services.
Need heating and cooling in Wausau, WI? Our HVAC team is standing by to take your call. Contact us for speedy service.
Wausau AC Repair — Emergency Air Conditioning Repair Available!
When you need prompt, reliable air conditioning repair in Wausau, make your first call to Frasier’s. Our team can handle all of your AC repair, replacement, and maintenance needs to keep you cool during the warm months. We are NATE certified for your peace of mind and are even available 24/7 to offer emergency AC repairs. Call today to schedule a service!
Furnace Repair in Wausau
A working heater is absolutely critical for comfort and safety during the freezing Wisconsin winters. If your furnace or other heater isn’t doing its job, be sure to call Frasier’s to schedule your appointment for furnace repair in Wausau. From mechanical repairs to dirty furnace filter replacements, we’ll get your heater working in no time.
Our Wausau furnace repair team can handle all sorts of common heating issues, including:
- Pilot light won’t stay lit: If you have a gas furnace, a malfunctioning pilot light means that your furnace won’t work. Usually, pilot light issues signal a problem with the thermocouple.
- Furnace smells bad: Is your gas furnace emitting a rotten egg smell? Are you smelling burning plastic or ozone? Any odd smell coming from your furnace should be treated as as emergency. Turn off your system and call for furnace repairs immediately.
- Furnace is blowing cold air: If your furnace turns on but isn’t blowing warm air, you may have a dirty air filter or faulty burners. You should also check your thermostat to make sure it is set to “AUTO” instead of “ON.”
- Furnace is making unusual sounds: Do you hear a booming, banging, rumbling, clicking, buzzing, whistling, or any other weird noise coming from your furnace? Strange sounds have a number of causes, but all should be investigated by a furnace repair professional.
- There’s rust on your furnace: Rust could indicate combustion gas/exhaust problems. If you have a gas furnace, this evidence of the presence of excess carbon monoxide poses a safety hazard, so call for repairs as soon as possible.
To keep your heater in good condition and extend its lifespan, be sure to schedule a furnace maintenance appointment at least annually. Periodic maintenance is a simple way to get the most out of your heater and protect your investment. Regular maintenance can also reduce the chances that your heater will completely break down when you need it most.
Heating & Air Conditioning Replacements & New Installations
At Frasier’s, we always strive to repair HVAC systems when it makes sense to do so. However, if your older system is beyond repair or if it would simply make more financial sense to forego repairs in favor of a replacement, we’ll guide you through your options for selecting a new system. We install air conditioners and furnaces from trusted brands and happily offer financing options to help make your purchase more affordable!
Give Us a Call for Your HVAC Needs!
If you need plumbing, heating or cooling installation, repairs or maintenance in Northern Wisconsin, get in touch with our friendly, professional technicians today! We always price our services based on the job you need — not by the hour, so you know up-front what you will pay before we even start work. We offer total customer satisfaction and stand behind the quality of our work with fantastic warranties.
If you need HVAC service in Wausau, contact us online or call today!
Recent Jobs and Reviews in Wausau, WI
Job Locations and Reviews
Completed annual maintenance inspection on 9-year-old residential forced air furnace and air conditioning system. Furnace inspection revealed corrosion on igniter, burners, and flame sensor, along with aging capacitor; significant accumulation of leaves and organic debris found in base pan requiring cleaning. AC system inspection identified buildup on condenser coils, aging capacitor and contactor; provided estimates for replacement of worn components to ensure reliable operation.
Responded to emergency no-cool call for dog kennel building. Upon inspection, found condenser unit heavily obstructed with dog hair accumulation on exterior coil, preventing proper heat rejection. Air filter was severely clogged with debris and contaminants, restricting airflow. Refrigerant charge measured low during system diagnostics. Discussed repair options with property owner, who authorized condenser coil cleaning to restore proper heat transfer and airflow. Coordinated with comfort advisor to provide system replacement estimates for customer consideration due to overall system condition and efficiency concerns.
Responded to service call for boiler system continuously running and overheating the home with excessively hot water temperature. Diagnosed and identified a zone valve actuator stuck in the open position and a thermostat with an internal short causing a continuous heat call. Replaced the defective zone valve actuator and faulty thermostat, restoring proper system operation and temperature control.
Responded to no cooling complaint at group home facility. Upon inspection, discovered broken wiring at the outdoor condensing unit causing system failure. Replaced damaged wiring connections to capacitor and contactor, secured all electrical connections, and restored proper wire routing. Tested system operation and confirmed unit cooling properly before departure.
Responded to request for comprehensive duct cleaning service due to heavy contamination from pet dander and hair. Upon inspection, found significant dust and hair buildup throughout the ductwork system and substantial accumulation on the blower wheel assembly, which was impacting airflow efficiency. Performed complete duct system cleaning to remove all debris and contaminants, thoroughly cleaned the blower wheel to restore optimal performance, and applied sanitization treatment to the entire duct system to eliminate allergens and improve indoor air quality.
Responded to no cooling complaint on 3-year-old residential air conditioning system. Found unit struggling to maintain temperature with thermostat set at 63°F but interior reaching 74°F or higher. Discovered low refrigerant levels and significant ice buildup on evaporator coil. Inspected evaporator coil assembly and blower wheel components, documenting conditions with photos. Performed nitrogen leak test to identify source of refrigerant loss and continued diagnostic troubleshooting to determine repair requirements.
Responded to no cooling call on residential air conditioning system. Upon arrival, found outdoor condenser unit not engaging. Inspected control board and wiring connections, discovered control wiring disconnected from condenser relay preventing compressor operation. Reconnected control wiring and attempted system startup. Connected refrigerant gauge manifold to service ports and performed pressure check, revealing system severely undercharged indicating refrigerant leak. Performed nitrogen leak check procedure to identify leak location. Due to extent of refrigerant loss and required leak repair, recommended comfort advisor consultation for repair estimate and customer options.
Responded to no cooling complaint on Trane unit model 4TTB3024G1000AA. Upon arrival, found indoor fan operating but no cooling present. Diagnosed electrical issue with breaker supplying outdoor condensing unit - breaker was incorrectly sized or tripped. Corrected breaker issue, restored power to outdoor unit, and verified system operation with proper cooling restored.
Responded to no cooling condition at residential property. Upon inspection, found outdoor condenser unit fan operating but system not producing cool air. Diagnosed failed capacitor preventing compressor from running properly. Replaced defective capacitor with new unit, restored all electrical connections, and verified system operation. Unit now cooling effectively with all components functioning within normal parameters.
Responded to no cooling complaint with error code 292 indicating blower motor start fault on a 2-year-old AC system. Upon inspection, confirmed blower motor was seized and preventing system operation. Removed failed blower motor assembly, installed new replacement motor, verified proper operation of blower wheel and airflow, cleared error code, and tested system for normal cooling cycle.
Conducted site assessment for commercial kitchen hood vent installation in lower apartment unit designated for candy production operations. Customer requires exhaust hood system to be vented to building exterior for operation over candy-making cauldron. Assessment revealed space currently undergoing renovation with electrical and plumbing infrastructure requiring completion prior to ventilation work. Created preliminary estimate pending receipt of detailed specifications and equipment documentation from customer, as cauldron unit was not present on-site for dimensional verification and CFM requirements. Photographed existing conditions showing deteriorated kitchen space with water-damaged walls, exposed ceiling areas, vintage appliances, and construction materials staged throughout work area. Project coordination required with electrical and plumbing contractors for proper sequencing of multi-trade installation.
Responded to callback for recently installed furnace with loose access panel and thermostat operation concerns. Secured furnace panel door by replacing defective retaining knobs to ensure proper fit and seal. Removed existing programmable thermostat and installed customer-supplied simpler model, completing all wiring connections and verifying proper system operation.
Responded to no cooling call on 8-year-old air conditioning system. Upon arrival, discovered furnace power switch in off position, preventing system operation. Restored power to unit and verified proper operation of all system components including contactor, capacitor, and thermostat functionality. System restored to normal cooling operation with no additional repairs required.
Completed annual inspection and tune-up on residential air conditioning system. Cleaned blower wheel which had accumulated buildup, removed dust and leaf debris from condenser coil, and cleaned corroded thermostat terminals to ensure proper electrical connections. Documented oxidized refrigerant lineset and damaged exterior insulation from animal activity, provided estimates for repairs, and verified system operational parameters within manufacturer specifications.
Responded to no heat and no hot water complaint on Weil-McLain boiler system. Found fault error displayed on digital control panel. Successfully reset boiler control unit, restoring heat and hot water operation to the system.
Responded to service call for deteriorated refrigerant lineset insulation on residential HVAC system. Upon inspection, found existing lineset insulation had degraded and was no longer providing adequate protection, exposing copper refrigerant lines to environmental elements. Removed old damaged insulation and installed new lineset insulation to proper specifications, ensuring complete coverage and protection of refrigerant lines running along exterior of structure. System now properly insulated to maintain efficiency and prevent condensation issues.
Completed annual inspection on 11-year-old air conditioning unit. Found capacitor testing below specification causing inefficient operation, aged contactor showing wear, and dirty evaporator coil and blower wheel requiring cleaning. Unit was also overdue for filtration service. Provided estimates for necessary repairs and maintenance. Customer approved capacitor replacement only at this time, which was completed and tested. All other recommended repairs and comfort advisor consultation were declined for future consideration.
Completed partner plan annual inspection on furnace. Found burners with corrosion buildup, dirty filter, and combustion levels reading outside acceptable parameters. Cleaned and serviced burners, adjusted gas valve to restore proper combustion levels, and installed new filter. Customer inquired about water heater replacement options for future consideration.
Responded to service callback regarding outdoor mini split cover displacement following previous technician visit. Upon arrival, confirmed Fujitsu outdoor unit cover was improperly seated. Repositioned and secured cover panel to manufacturer specifications, ensuring proper alignment and fitment. Unit operational and installation restored to normal condition.
Responded to no cooling complaint and diagnosed a failed blower motor preventing air circulation through the system. Replaced the defective blower motor and restored proper airflow. Also noted a heavily contaminated air filter during service that would benefit from replacement to maintain optimal system performance.
