Since 1918, Frasier’s Plumbing, Heating, Cooling, & Electrical experts have proudly served clients in Tomahawk, Weston, and many other Wisconsin communities. Our certified and insured HVAC technicians provide a full range of heating, cooling, indoor air quality and plumbing services. No matter your needs, Frasier’s has you covered!
When you need reliable HVAC services in Tomahawk, call Frasier’s at (715) 804 0947 to schedule a service appointment!
Top-Rated Heating Services
Our certified HVAC technicians can install, repair, maintain, and replace the gas furnace, electric furnace, heat pump, or boiler you depend on for your comfort.
We service all makes and models and can accurately diagnose complex problems. Plus, our preventative maintenance services will help you enjoy optimal system performance and superior energy efficiency, extending the serviceable life of your heating system.
Our heating services include:
Dependable Cooling Services
Our comprehensive cooling services will keep you cool and comfortable on the hottest summer day. Our team can perform thorough load calculations, detailed inspections, effective maintenance, precise repairs, and more.
We service central air conditioners, ductless mini-splits, and heat pumps and will always help you find the optimal solution for your budget and desired comfort. Our solutions will reduce your utility bills, reduce your carbon footprint, and extend the life span of your cooling system.
Our cooling services include:
Contact Frasier’s at (715) 804 0947 when you need reliable air conditioner installation, maintenance, repairs, or replacement services in Tomahawk, WI!
Expert Heat Pump Services
Heat pumps are an energy-efficient, cost-effective solution that will keep your home cool and comfortable in the summer and warm and cozy in the winter. Our heat pump specialists service all makes and models. We offer a broad range of heat pump systems and will help you select the system that meets your size, energy efficiency, and cost requirements.
Our heat pump services include installation, maintenance, and repair.
Call (715) 804 0947 to schedule heat pump services in Tomahawk, WI, today!
Professional Indoor Air Quality Services
We work hard to help you clean the air in your home so that you can enjoy a breath of fresh air every day of the year. The indoor air quality specialists at Frasier’s offer a full range of indoor air quality services, including:
- Humidifiers: Humidifiers help alleviate issues caused by dry air, including itchy skin, allergies, and more. Humidifiers effectively add moisture to the air within your home, thus improving your comfort and making breathing easier.
- Dehumidifiers: If your home’s air has too much humidity, it can facilitate mold and mildew proliferation. Our dehumidifiers efficiently remove excess moisture, thus helping maintain optimal indoor air quality.
- Duct cleaning: Dust, debris, pollen, pet dander, and other pollutants can build up within your ducts and recirculate through your home. Regular duct cleaning helps remove these pollutants, improving indoor air quality and reducing wear and tear on your HVAC systems.
- Air purifiers: We can install air purifiers that remove dust, pollen, pet dander, VOCs, and other pollutants and allergens from the air circulating within your home.
When you are ready to breathe easier, call (715) 804 0947 to schedule indoor air quality services in Tomahawk, WI, today!
Why Choose Frasier’s in Tomahawk?
We are committed to serving our community, and since 1918, we have worked hard to provide the superior quality solutions our clients deserve. Our licensed and insured HVAC technicians maintain the up-to-date skills and advanced expertise necessary to service the heating, cooling, and indoor air quality systems you depend on.
When you choose our award-winning team, you will always enjoy:
- Friendly service
- NATE-certified technicians
- Expert recommendations and workmanship
- Service Partner Program
- Financing and special offers
- And more!
Schedule the HVAC and IAQ services you need in Tomahawk, WI, by calling (715) 804 0947!
Recent Jobs and Reviews in Tomahawk, WI
Job Locations and Reviews
Responded to no cooling complaint on 8-year-old residential air conditioning system. Upon arrival, contacted property owner and gained access to perform diagnostic evaluation. Inspected outdoor condensing unit and identified failed dual run capacitor exhibiting severe corrosion and deterioration. Removed defective capacitor from electrical control panel and installed new replacement capacitor with proper microfarad ratings. Verified all electrical connections were secure, tested system operation, and confirmed unit returned to normal cooling function.
Completed Partner Plan annual maintenance inspection on boiler system. Found combustion levels outside of manufacturer specifications and performed necessary adjustments to bring all readings back within proper parameters. Verified system operation and documented equipment condition with photos showing heat exchanger assembly and pressure measurements using calibrated digital manometer reading -04.67 inches of water column.
Responded to callback for recently installed boiler exhibiting leakage beneath unit. Upon inspection, identified seepage at packing nuts on new brass ball valves in supply piping system. Tightened packing nuts on affected valves to eliminate leaks and restore proper seal integrity. Verified no further seepage present after adjustment.
Completed annual preventative maintenance inspection on furnace system. Performed comprehensive system evaluation including visual inspection of all accessible components, ductwork, and ventilation systems. All equipment found operating within normal parameters with standard dust accumulation noted on mechanical components.
Completed annual prepaid maintenance inspection on boiler system. Upon inspection, discovered heat exchanger failure with extensive rust and corrosion throughout the finned coil assembly, compromising system integrity and safety. Documented equipment condition with photographs showing deteriorated heat exchanger fins with heavy oxidation and pressure gauge reading approximately 15 PSI. Informed customer of failed component requiring repair or replacement to restore safe operation.
Completed annual preventive maintenance on 15-year-old Furnace system. Performed comprehensive inspection of blower assembly and verified proper operation. Conducted combustion analysis with readings showing O2 at 9.8%, CO2 at 6.3%, and ambient CO levels at 44 ppm, all within acceptable parameters for safe operation.
Completed annual preventive maintenance inspection on boiler system. Verified system pressure readings, inspected all mechanical connections and copper piping, and documented equipment condition with photographs for service records.
Responded to no heat call on 20-year-old furnace unit. Upon inspection, identified multiple critical component failures including corroded burners, igniter, and flame sensor. Inducer motor found drawing amperage higher than rated specifications, and inducer capacitor tested out of spec. Documented all failing components with photographs showing extensive corrosion on burner assembly and deteriorated condition of internal components. Due to age of unit and extent of required repairs, provided estimates for necessary work and scheduled comfort advisor consultation for system replacement evaluation.
Completed annual furnace inspection on Goodman GM9S060B12DH11J 62,000 BTU/Hr Category IV direct vent unit. Identified aging inducer motor and rust formation on burners requiring attention. Provided customer with immediate repair and preventive maintenance recommendations to address deteriorating components before potential system failure.
Completed annual heat inspection on 12-year-old furnace as part of Partner Plan maintenance agreement. Performed preventive maintenance procedures, inspected blower assembly and internal components, and documented system condition with photos. Customer will need 20x25x5 filter replacement scheduled for next visit.
Performed annual inspection on 24-year-old furnace that experienced issues last winter. Observed significant corrosion on heat exchanger components and documented condition with photos. Recommended replacement evaluation due to advanced age and deterioration of critical components.
Performed annual boiler inspection and maintenance service. Conducted combustion analysis showing acceptable parameters (O2: 2.5%, CO: 11ppm, CO2: 10.5%, stack temperature: 104.0°F). Inspected gas supply valves and noted minor oxidation on brass fittings that requires monitoring but is currently functioning properly.
Performed comprehensive annual maintenance on LP furnace as scheduled. Conducted combustion analysis showing acceptable readings (O2: 12.2%, CO: 16P, CO2: 5.7%, stack temperature: 84.8°F) and inspected blower assembly which showed moderate dust accumulation. System is operating within normal parameters; preventative maintenance recommendations provided.
Performed annual partner plan maintenance on 23-year-old furnace. Conducted electrical inspection, heat system evaluation, and gas leak detection with no issues found. Verified proper combustion parameters with analyzer showing acceptable O2 (5.0%), CO (29ppm), CO2 (9.1%), and flue temperature (89.2°F) readings.
Responded to recall service for boiler with no heat issue. Discovered electrode gasket was not properly installed during previous service. Replaced gasket under warranty and performed complementary heat exchanger cleaning to restore proper system operation.
Diagnosed and resolved overheating issue in basement zone where thermostat was set at 63°F but actual temperature reached 75°F. Determined valve body had seized partially open, causing continuous heating. Replaced entire basement zone valve with Schneider Electric model AG13A02A0F to restore proper temperature control functionality.
Performed annual boiler inspection under Partner Plan maintenance agreement. Identified faulty exhaust damper that was not fully opening during intermittent cycles, causing combustion gas buildup and potential carbon monoxide backflow into residence. Replaced damper during service visit to restore proper venting function and ensure safe operation.
Responded to no heat complaint on aging HVAC system located in loft area. Diagnostic inspection revealed restricted airflow due to dirty filter. Installed customer-supplied replacement filter and verified proper system operation with restored heat output.
Completed partner plan annual inspection on 15-year-old furnace, identifying multiple issues including flame sensor with dead spots and high resistance, corroded igniters and burners, dirty blower wheel, and discoloration on the control board. Documentation included photographs of the burner assembly showing significant corrosion and the functioning control board for reference. Customer elected to proceed with comfort advisor consultation for replacement options.
Completed annual prepaid maintenance on furnace per partner plan agreement. Identified and cleaned flame sensor with high resistance points and dead spots; also cleaned burners showing accumulation of soot and early signs of pitting. Provided customer with estimates for recommended future repairs.
